Liquid Tape - EEE Made Easy

Liquid Tape is an air dry synthetic rubber coating that can be easily brushed on and exhibits excellent moisture, acid, alkaline, abrasion and dielectric resistance. It can be used on bare parts of Electric cable joints , where the regular insulation tape is not effective. Liquid Tape can be used to insulate, protect and color code.

Contents

Liquid Tape Types

Liquid Tape Brush type

Liquid-Tape-Electrical-Brush — Liquid Tape Electrical Brush type

Liquid Tape is available in red, black, green, and white.

It will not crack, peel, or harden and remains flexible even under extreme conditions.

Liquid Tape Spray type

Applications of Liquid Tape

Liquid Tape can be used in many applications including electrical connections for boats, trailers, RV’s, trucks, automobiles, timers, pool electrical, bilge pumps, sprinkler pumps, instruments, computers, circuit boards, switches, and will stop terminal screws from vibrating loose.

Use Liquid Tape to insulate, protect and color code.

Liquid-Tape-Electrical-Brush-Spray-On-Insulation. — Liquid Tape Electrical Brush and Spray On Insulation.

How to use liquid electrical tape

Surface Preparation for applying liquid tape

Wires, terminals, or all other surfaces must be clean, dry, and free of all oils, grease, wax and loose rust.
Mix Well Before Use & Use Adequate Ventilation
Stir gently with brush applicator cap to avoid producing bubbles before each use. Apply wet overlapping coats.
Allow 10 – 20 minutes dry time (dry to the touch) before applying additional coats to desired thickness.
A minimum of 2 – 3 coats are recommended for best results. Allow 24 hours for fully cure.

Caution

Turn off power before starting electrical work and follow your local electrical codes.
Minimum of 2 coats required (5+ mils) to assure good dielectric protection.
Allow 4 hours dry time per coat before use. Allow overnight drying whenever possible and avoid excessive air movement, heat, or humidity.
Always use proper ventilation and protection.

Gardner Bender, White LTG-400 Liquid Electrical Tape

Specification of Liquid Tape

Dielectric: (ASTM D-149) 1,400 v/mil
Solids (wt.): 24%
Tensile: (ASTM D-638) 430%
Cut resistance: (ASTM D-1044) very good
Shelf life: 1 year at 77˚F
Chemical resistance: acids, alkalines, pollutants – excellent petroleum’s – limited
Durometer shore A: (ASTM D-2240) 70
Salt Spray: (ASTM B-117) passed 1,000 hours
Weather ability: (ASTM G-53) 3 – 5 years
Temperature use range: -30˚F to 200˚F
Stone abrasion: (ASTM D-3170) excellent
Permealbility: (ASTM E-96) .03 grains/sq. ft./hr.
Viscosity range: 90 – 110 K.U. @ 77˚F (+/- 2˚F)

Join EEE Made Easy Whatsapp Channel

Where to buy liquid electrical tape

Buy Outside India	Buy in India
Gardner Bender LTB-400 Liquid Electrical Tape, Black	Gardner Ber LTB-400 Liquid Electrical Tapeend, Black
Gardner Bender, Green LTG-400 Liquid Electrical Tape	PUNZONE Liquid Electrical Tape
Gardner Bender, Red LTG-400 Liquid Electrical Tape	OUHOE Liquid Electrical Tape
Gardner Bender, White LTG-400 Liquid Electrical Tape	Gardner Bender LTG-400 Green Liquid Electrical Tape
Permatex 85120 Liquid Electrical Tape	Gardner Bender LTW-400 Liquid Tape, White