INDUSTRIAL EXTENSION OFFICER EEE MADE EASY
Basic Civil Engineering MCQ-set 3
1.Stones are obtained from rocks that are made up of:
a) Ores
b) Minerals
c) Chemical compounds
d) Crystals
Answer: b
Explanation: Rocks are made up of minerals. They can be monomineralic(single mineral) or polymineralic(more than one mineral).
2
The hot molten material occurring naturally below the surface of the Earth is called:
a) Lava
b) Slag
c) Magma
d) Tuff
Answer: c
Explanation: Hot molten material is called Lava when it erupts from a volcano and reaches the surface. Slag is waste material from smelting of ore. Tuff is a porous rock formed by consolidation of volcanic ash.
3
Which of the following is not a metamorphic change?
a) Calcite to schist
b) Limestone to marble
c) Shale to slate
d) Granite to gneisses
Answer: a
Explanation: Calcite is a carbonate mineral whereas schist is a metamorphic rock formed by metamorphosis of mudstone/shale to higher degree than slate.
4
Why is natural cement used very limitedly?
a) Brown in Colour
b) Standard consistency is not met with
c) Sets too quickly
d) Particle size is too fine
Answer: c
Explanation: Natural cement sets very quickly after addition of water and hence it is not quite workable. Artificial cement is preferred over this.
5
Who invented Portland cement and in which year?
a) William Aspdin, 1824
b) William Aspdin, 1840s
c) Joseph Aspdin, 1840s
d) Joseph Aspdin, 1824
Answer: b
Explanation: Joseph Aspdinpatented Portland cement in 1824. William Aspdin, his son is regarded as inventor of modern Portland cement due to his developments in 1840s.
6
What is the average particle size of cement?
a) 15 microns
b) 45 microns
c) 75 microns
d) 100 microns
Answer: a
Explanation: Approximately 95% of cement particles are smaller than 45 microns and the average particle size is 15 microns.
7
What is the meaning of soundness of cement?
a) Ability to flow when mixed
b) Ability to make ringing noise when struck
c) Ability to form strong and sound structure
d) Ability to retain volume after setting.
Answer: d
Explanation: When cement paste hardens and sets, it should not undergo any volume change. Soundness ensures this and is tested using Autoclave expansion test.
8
Time elapsed from the instance of adding water until paste ceases to behave as fluid is called:
a) Initial setting time
b) Final setting time
c) Intermediate setting time
d) Absolute setting time
Answer: a
Explanation: Final setting time is the time required for cement paste to reach certain state of hardness. Option c and d does not exist.
9
Which of the below mentioned is not a result of field test performed on cement?
a) There should not be any lumps
b) It should feel cold when you put your hand in bag of cement
c) The colourshould be blackish grey
d) It should not be gritty when rubbed with finger
Answer: c
Explanation: The colourof cement is normally grey with a greenish tint. There are different shades โlighter and darker, but it does not go as dark as blackish grey.
10
Which equipment is used to test setting time of cement?
a) Core cutter
b) Vibrator
c) Universal testing machine (UTM)
d) Vicatapparatus
Answer: d
Explanation: Core cutter is used to determine dry density of soil. Vibrator is used in sieve analysis. UTM can be used to test various parameters โtension, bending, shear of various materials. Vicatapparatus consists of a needle, used to penetrate the cement paste sample.
11
What is the initial setting time of cement?
a) 1 hour
b) 30 minutes
c) 15 minutes
d) 30 hours
Answer: b
Explanation: As per IS code 4031-part 5, the initial setting time of cement is minimum of 30 minutes. After this cement will start losing its plasticity and will not be workable.
12
Use of coarser cement particles leads to:
a) Low durability
b) Higher strength
c) Low consistency
d) Higher soundness
Answer: a
Explanation: For coarser particles, hydration starts on surface of particles, hence, it might not be completely hydrated. This causes low strength and low durability.
13
Wet cement can cause severe skin burns if not washed off with water immediately.
a) True
b) False
Answer: a
Explanation: Cement is highly alkaline and setting process is exothermic. Wet cement is strongly caustic and causes skin burns. Similarly, dry cement causes eye or respiratory irritation, when it comes in contact with mucous membranes.
14
What is the most dominant constituent of cement?
a) Silica
b) Lime
c) Magnesia
d) Alumina
Answer: b
Explanation: Cement contains about 60-65% of lime. Silica constitutes 17-25%, alumina 3-8% and magnesia 1-3%.
15
Deficiency of lime in cement leads to:
a) Unsound cement
b) Disintegration of cement
c) Quick setting of cement
d) Expansion of cement
Answer: c
Explanation: Presence of lime in sufficient quantity is necessary to form silicates and aluminates of calcium. Excess lime leads to expansion, disintegration and unsoundness of cement.
You can watch the class here PART 1 , PART 2
DOWNLOAD PDF1, DOWNLOAD PDF 2
๏ตYou can visit
www.bibimohanan.comโโMy Notebook Blogโ
www.eeemadeeasy.com.comโโ EEE Made Easyโ blog for study materials
โ My Notebookโ You tube channel for PSC Coaching